The Compressed Air Blog | Compressed Air and Gas Tips from Atlas Copco

Boost your compressed air system efficiency with high-pressure solutions

Written by Atlas Copco Compressors | Nov 19, 2026

When your manufacturing process requires higher compressed air pressure, you don't necessarily need to replace your entire compressor system. A high-pressure air booster can increase the pressure of your existing compressed air supply, delivering the additional pressure needed for specific applications without requiring your entire facility to operate at higher pressures.

For manufacturers in industries such asPET bottle production, food and beverage, metalworking, aerospace and automotive, having the right air pressure is essential to maintaining production performance. However, generating higher pressure than necessary throughout an entire compressed air system can introduce unnecessary operating costs.

That's where the Atlas Copco ZGH high-pressure booster comes in.

Designed with 100% oil-free screw booster technology with discharge pressure up to 435 psig, an IE5 Permanent Magnet water-cooled motor, plug-and-play design, ZGH offers a practical solution for operations that need higher-pressure air without an unnecessarily complicated installation.

What is a high-pressure air booster?

A high-pressure air booster is a machine that takes compressed air from an existing air system and increases its pressure to meet the requirements of a particular application.

Rather than increasing the pressure of the entire compressed air network, a booster can provide higher-pressure air to the processes that specifically need it.

For example, a manufacturing facility may operate its main compressed air system at a standard plant pressure, while one production process requires air above 150 psig. Instead of increasing the pressure throughout the entire facility, a properly sized air compressor booster system can provide the additional pressure where it is needed.

This approach can help manufacturers optimize their compressed air installations, reduce unnecessary system demands and better match air supply to production requirements.

Why should you consider a high-pressure booster instead of a new compressor?

If your facility needs higher air pressure, replacing your existing compressor isn't always the most practical solution.

A high-pressure booster can work alongside your existing compressed air installation, increasing pressure for specific applications rather than requiring an entirely new compressed air system.

Here are several reasons manufacturers should consider a booster:

  1. Get higher pressure where you need it.

Not every production process requires the same air pressure. A booster allows you to target applications with higher pressure requirements instead of raising the operating pressure throughout your facility.

  1. Avoid unnecessary system upgrades.

If your existing compressed air system can supply the required inlet air, a booster may offer an alternative to purchasing and installing an entirely new compressor system. The appropriate solution depends on your required flow, inlet pressure and final discharge pressure.

  1. Improve overall system efficiency.

Operating an entire compressed air network at unnecessarily high pressure can increase energy consumption. Using a booster for specific high-pressure applications can help avoid that approach. Proper equipment sizing and system design are essential to realizing the potential savings.

  1. Keep installation simple.

A compact, plug-and-play booster can make integration easier, particularly when replacing an existing machine or working within limited equipment space.

What makes the Atlas Copco ZGH high-pressure booster different?

The Atlas Copco ZGH combines high-pressure screw booster technology with features designed to support reliable, efficient industrial operations.

100% oil-free high-pressure compression

For applications where air quality matters, oil-free compression can be an important consideration.

ZGH uses 100% oil-free screw booster technology delivering pressure upto 435 psig, help support processes where oil contamination must be avoided.

This is particularly relevant for food and beverage manufacturers and other production environments where compressed air quality is an important part of the manufacturing process.

Permanent Magnet motor technology

Efficiency matters when compressed air equipment operates as part of a continuous production process.

ZGH features a Permanent Magnet IP66 motor, providing advanced motor technology designed to support efficient operation.

For manufacturers looking to manage operating costs while maintaining production requirements, motor efficiency is an important consideration when evaluating equipment.

Compact, plug-and-play design

Industrial facilities don't always have extra room for additional equipment.

ZGH features a compact design intended to simplify installation and integration into existing compressed air systems. Its plug-and-play approach can also make replacing an existing booster more convenient.

The result is a high-pressure solution designed to fit into industrial environments without unnecessarily complicating the installation.

Low total cost of ownership

The initial purchase price is only one part of the cost of operating compressed air equipment.

Energy consumption, maintenance requirements, equipment reliability and service support all contribute to total cost of ownership (TCO).

ZGH is designed to offer a low-TCO solution by combining efficient motor technology, oil-free screw compression and a practical installation approach.

Atlas Copco's widespread service network throughout the USA also provides access to support for customers operating in demanding production environments.

Which industries benefit from a high-pressure air booster?

High-pressure compressed air is used in a variety of industrial applications. The exact pressure and flow requirements depend on the production process, equipment and facility.

Here are five industries where a high-pressure booster may be worth considering.

PET bottle manufacturing

PET bottle production is one of the most recognizable applications for high-pressure compressed air.

Blow molding processes require compressed air to expand heated PET preforms into bottles. Consistent pressure and reliable air supply are important to maintaining production quality and output.

A high-pressure booster can help deliver the pressure required by PET production equipment while allowing the facility to use its existing compressed air supply as the starting point.

For high-volume bottling operations, reliable equipment and efficient operation are especially important.

Food and beverage production

Compressed air supports numerous applications throughout food and beverage manufacturing, including packaging, conveying and production processes.

Where compressed air comes into contact with products or packaging, air quality is an important consideration.

ZGH's 100% oil-free screw booster technology provides a high-pressure option for applications where oil-free compression is required.

For beverage producers, the combination of oil-free compression, compact installation and high-pressure capability can make ZGH worth evaluating.

Metal manufacturing

Metalworking operations may require compressed air at higher pressures for specialized equipment and production processes.

A high-pressure booster can help supply the additional pressure required by a particular application without raising pressure throughout the entire facility.

For manufacturers managing multiple compressed air demands, this can be an opportunity to better match equipment performance to individual processes.

Aerospace manufacturing

Aerospace production environments often involve specialized manufacturing equipment and demanding operational requirements.

When specific applications require higher-pressure compressed air, a booster can provide an additional pressure stage to support those needs.

Evaluating the required air quality, flow and pressure is essential when selecting the right compressed air solution.

Automotive manufacturing

Automotive production facilities depend on reliable compressed air to support a wide range of manufacturing and assembly processes.

Some specialized applications may require higher pressures than the facility's standard compressed air network provides.

A high-pressure air booster can help deliver the additional pressure needed for these processes while allowing the rest of the facility to operate at its normal system pressure.

How do you know if your facility needs a compressed air booster?

Not every compressed air system needs a booster. However, if your facility regularly requires higher pressure for certain processes, it may be worth evaluating.

Start by asking your maintenance, engineering or production team these questions:

    • Do any applications in your facility require compressed air above 150 psig?
    • Are you currently operating your entire compressed air system at a higher pressure to accommodate one process?
    • Do you experience inconsistent pressure at specific machines or production lines?
    • Are you considering purchasing a new compressor to meet additional pressure requirements?
    • Would reducing energy costs and minimizing downtime be priorities for your operation?
    • Is your current booster equipment due for replacement?

If you answered yes to any of these questions, a compressed air system assessment can help determine whether a booster is the right solution.

A proper evaluation should consider inlet pressure, required discharge pressure, air flow, air quality, duty cycle and the existing compressed air system's capacity.

Boost your pressure with the Atlas Copco ZGH

Higher pressure doesn't have to mean a complete overhaul of your compressed air system.

The Atlas Copco ZGH high-pressure booster combines 100% oil-free screw booster technology, an IP66 Permanent Magnet motor and a compact, plug-and-play design to help manufacturers meet demanding pressure requirements.

Whether you're producing PET bottles, manufacturing food and beverage products, working with metal or supporting specialized automotive and aerospace processes, ZGH offers a practical option for applications requiring higher-pressure compressed air.

Boost your pressure. Cut your service costs.

Ready to find out whether ZGH is right for your facility?

Contact Atlas Copco to discuss your application and explore a high-pressure compressed air solution designed around your production needs.

 

FAQs